Skip to main content
Skip table of contents

AZ Compliance at a Glance

PowerSchool Special Programs Best Practices

Integration with Student Information Systems (SIS)

Import Layouts

Software menu path: Administration, then Configuration, then Integration, then Import Layouts

  • Use Import Layouts to import data from the PowerSchool SIS into PowerSchool Special Programs.

  • System administrators should routinely check the Last Imported date and ensure no errors are found.

  • Select Continuous Integration Settings from the More menu to check if a layout is enabled.

Writeback Export Reports

Software menu path: Reporting, then Standard Reports, then PowerSchool Export or eSPExport

  • Writeback Export Reports via the Reporting menu send data to the SIS (eSchoolPlus or PowerSchool SIS) from PowerSchool Special Programs.

  • These reports collect the specific special education, gifted, and 504 student data uploaded to the SIS.

  • To export data, you must enable each report in the application.

  • System administrators should routinely check the Last Successful Export and Last Export Attempted Time Stamp dates are the same. If the dates are different, the export has failed. Review the error log and correct the applicable data.

  • For more details regarding what student data exports to PowerSchool SIS, see PowerSchool SIS Integration.

PowerSchool recommends system administrators routinely review the enabled export reports and import layouts for any errors. Special Programs can send an email to administrators with a compilation of all integration errors. To set this up:

  1. Go to Administration, Configuration, then Config Tasks and choose or create a configuration task.

  2. Go to Administration, then Configuration, then Integration.

  3. From the More... menu, choose Continuous Integration Settings.

  4. Click the pencil icon to edit the required integration instance.

  5. Enter the Notification Email Address. To send notifications to multiple recipients, enter email addresses separated with a comma (,).

  6. Click Accept.

  7. Enter your password, and click OK.

If integration failures persist and are not followed by successful integration runs, contact the PowerSchool support team or log a support ticket.

End of School Year

The system administrator performs the end-of-school-year rollover process and includes school-year document folders, calendar settings, and progress reporting marking periods.

See End of Year Rollover for more information.

New to PowerSchool Special Programs

When the special education data migration to PowerSchool Special Programs is complete, PowerSchool recommends generating all required state reports.

  • Run all reports regardless of when the reports are due to the State.

  • Compare the reports to those run from your previous special education system to ensure data is appropriately migrated.

  • Proper data migration ensures reports from both systems match. It is best practice to run the reports as soon as possible during your implementation.

State Reporting

PowerSchool recommends districts run the upcoming state report(s) monthly to ensure data accuracy.

State reporting typically has stages of submission, “Collection Open,” “Collection Closes date,” “Correction Window,” and “Final submission.”

Reporting Timelines

Generate in Live PowerSchool Special Programs

Create Snapshot Database

Run Reporting within Snapshot Database

December 1 (12/1)

October 15 (10/15)

Approximately November 30 (11/30)

From the creation of the snapshot database to the final submission

End of Year (EOY)

May 15 (5/15)

Approximately June 29 (6/29)

From the creation of the snapshot database to the final submission

Quarterly

Table 8A

N/A

N/A

Snapshotting Database for State Reporting

The PowerSchool Special Programs application does not historically track some special education state-reportable data, such as disabilities. The administrator of PowerSchool Special Programs must make a snapshot (a copy) of the live database on or just before the 12/1 and end-of-year reporting submissions.

Only one copy of your database can exist as a snapshot.

See Creating/Managing the Reporting Snapshot Database for more information.

  • After the snapshot is created and corrections for the reporting period need to be made, make all necessary changes in the snapshot database.

  • The system will prompt the user if the changes need to be pushed to the live database.

State Reports

(State Report Category Name - See PA Compliance at a Glance for Examples)

(All districts are required to run the ____ reports. Customers using eSchoolPlus will run the reports out of PowerSchool Special Programs as the reports are unavailable in eSchoolPlus.)

  • (PowerSchool SIS can run the ____ reports from PowerSchool SIS or PowerSchool Special Programs.)

Report

Due

Description

NA

12/1

This report is a count of students with an active IEP as of 12/1 of the current school year. Includes then only active students in Special Education.

NA

EOY

Includes any student that receives or received Special Education services within the school year. The same format as 12/1, but includes exit date/reason data.

(State Report Category Name - See PA Compliance at a Glance for Examples)

(ENTER TEXT HERE THAT APPLIES TO THESE REPORTS - For example, All districts are required to run these reports.)

Report

Due

Description

Student File

12/1 and EOY

This report counts students with an active IEP as of 12/1 of the current school year or active in Special Education within the year for EOY reporting. Includes only active students in Special Education.

Tables 1,2,3

EOY

Active staff within the current school year (Global dates). Access the reports via the Reporting\Advanced Reports menu.

Table 4A

EOY

Lists students that exited the current school year (Global dates).

Table 8A

Quarterly

Compliance report for initial evaluations indicating the timeline it took to complete the Special Education evaluation process (date parent consented to test to the evaluation meeting). 60 days to be compliant.

Table 9A

EOY

Reports Special Education students active within the current school year (globals) that had discipline/suspensions during the time they were in Special Education only.

Table 14

EOY

Private School Special Education students.

(State Report Category Name - See PA Compliance at a Glance for Examples)

(ENTER TEXT HERE THAT APPLIES TO THESE REPORTS - For example, All districts are required to run these reports.)

Report

Due

Description

Assignments

12/1 and EOY

The report is a count of students with an active IEP as of 12/1 of the current school year or active in SE within the year for EOY.

Compliance Dates

Quarterly

Initial and Re-evaluation students.

Expulsions

EOY

Reports SE students active within the current school year (globals) that had discipline/suspensions during the time they were in Special Education only.

Staff File

EOY

Active staff within the school year.

Student Address

EOY

The report is a count of students with an active IEP as of 12/1 of the current school year. Includes then only active students in Special Education.

Student File Leader Format

12/1 and EOY

The report is a count of students with an active IEP as of 12/1 of the current school year or active in SE within the year for EOY.

Suspensions

EOY

Reports Special Education students active within the current school year (globals) that had discipline/suspensions during the time they were in Special Education only.

Transition Assignments

EOY

Alternate format of the Assignment file. Same as Assignment file except for five additional Transition/Work Experience questions. The report is a count of students with an active IEP as of 12/1 of the current school year or active in SE within the year for EOY.

Unilateral Removal

EOY

Reports SE students active within the current school year (globals) with discipline/suspensions that were “unilateral removals” during the time they were in Special Education only.

State Mandated Special Education and Gifted Forms

The Special Education and Gifted forms in PowerSchool Special Programs will match the mandated state forms. PowerSchool typically releases state form changes within 6-8 weeks from receipt of changes. Additional forms such as 504, English Learner, and Response to Instruction (RTI) are not state-mandated.

Profiles

Software menu path: Search for a Student, click their Profile icon, and then use the dialog on the Profiles tab to see the fields in each section.

The following profiles and fields are important for state reporting:

Demographics (See PA Compliance at a Glance for Examples & replace text in this table with your state's details)

Field

Description

Secure ID

State-provided student ID number.

Serving Location Override

Manually tracked field to report a different serving location than what integrates from SIS into the Serving Location. State reports will report the value in the Serving Location Override if it is populated, otherwise reports the value from Serving Location.

Receives Letters

If selected, will display the names on forms and who can sign via DocuSign. The field will integrate from the SIS.

Eligibility (See PA Compliance at a Glance for Examples & replace text in this table with your state's details)

Field

Description

Special Ed Start Date

The latest IEP start date, not the initial start date in special education.

Location at time of SE Exit

Used to report the location where services were provided when the student exited. State reporting uses this field if populated to report the location of services.

Exclude Student from State Reporting

Manually select the checkbox to exclude the student on state reporting. This field does not have form data flow.

Referral Date

Entry Withdrawal Change or Initial Evaluation PWN Consent form.

Evaluation Report Date

Flows from the Evaluation report.

IEP Implementation Date

Flows from the IEP Implement Date field.

Latest Reevaluation Date

Flows from the Re-Evaluation form.

Date Permission to Re-Evaluate Received

Flows from Reeval PWN Consent or the Permission to Reevaluate forms.

NOREP Date

Flows from the NOREP form.

Found Eligible

Evaluation Report and Reevaluation Report.

Waived Re-Evaluation Date

IEP Meeting Waiver form.

Team Information – Case Manager

Flows from the IEP form, team area (excludes IEP revisions).

Current GS – Receiving Gifted Services Through IEP

Checked if the student receives services indicated on the IEP form where the text is indicated in section D. of section VI on the IEP. This value is used to create a GS program record in eSchoolPlus.

Previously GS – Received Gifted Services through IEP

Checked if the student’s finalized IEP does not indicate gifted services (section D. of section IV) and the Current GS value was previously selected on the profile.

(STATE-SPECIFIC PROFILE NAME - See PA Compliance at a Glance for Examples & replace text in this table with your state's details)

Field

Description

Type of Support & Amount of Special Ed Services

  • These values flow from the IEP form.

  • The IEP Placement area can store up to two school years.

  • Can report the current and next school year’s Type and Amount of support/services (e.g. Effective date on the IEP services page).

  • A script runs each day called Set Placement from Projected. The script uses today’s date, finds all IEPs where the next school year effective date is in the range of "today" and will update the two values on the PIMS page so that the user does not have to revise the IEP in the fall (start of school) to indicate the Type of Support and Amount of Services for the new school year.

  • State reporting will be accurate for 12/1 of that year.

Gifted: GX - Gifted but does not receive services:

  • Flows from the ____ form when the user selects “I do not approve...”.

  • Used to report _____ value.

Discipline

eSchoolPlus Integration import layout is available to import the data into PowerSchool Special Programs for ____ reporting.

Special Programs Enrollment

This profile is populated by a daily script labeled “Maintain SPEnrollment Records.” The data in this profile table is used to send data to PowerSchool SIS via PowerSchool Export reports.

Student Contacts (See PA Compliance at a Glance for Examples & replace text in this table with your state's details)

Field

Description

eSchoolPlus

Integrates eSP contacts via eSchoolPLUS-StudentContacts Import (model).

PowerSchool SIS

Integrates PowerSchool SIS unlimited contacts data via PowerSchool – StudentContact Import (model).

Daily script labeled Copy_Student_Contacts_Into_Students

Takes the top four contacts from the Student Contacts profile and updates the four contacts in the Demographic table.

All forms and reports that reference parent/guardian information fetches data from the Demographic table.

Global Settings

Software menu path: Administration, then Configuration, then Profile Types, then Globals

Settings to configure the IEP form and define the school year and submission dates for state reports.

Profile Types, then (GLOBALS), then Main menu, then Configurable Options section

  • Goal Wizard Enabled: Displays additional fields on the goal page of the IEP if Yes is selected.

  • IEP Goal Subject Area: Displays a drop-down value on the IEP form if Yes is selected.

Profile Types, then (GLOBALS), then the Main menu

  • School Calendar: The dates specified in this area determine the data generated for state reporting.

  • Model Configuration Options: Various options of the model.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.